E.5. sg driver

SG_SCATTER_SZ           {32768}
SG_DEF_RESERVED_SIZE    {SG_SCATTER_SZ}
SG_DEF_FORCE_LOW_DMA    {0}
SG_DEF_FORCE_PACK_ID    {0}
SG_DEF_KEP_ORPHAN       {0}
SG_MAX_QUEUE            {16}
SG_DEFAULT_RETRIES      {1}  # i.e. don't retry
SG_BIG_BUFF             {SG_DEF_RESERVED_SIZE}
SG_DEFAULT_TIMEOUT      {60 seconds}
SG_DEF_COMMAND_Q        {0 *}
SG_DEF_UNDERRUN_FLAG    {0}

* The per file descriptor copy of this flips to 1 (thus
  allowing command queuing) as soon as a write() based
  on the newer sg_io_hdr structure is detected.

SG_EMULATED_HOST     [indicate if adapter is ide-scsi]
SG_GET_COMMAND_Q     [command queuing flag state]
SG_GET_KEEP_ORPHAN   [interrupted SG_IO keep orphan flag state]
SG_GET_LOW_DMA       ["low dma flag" (<= 16 MB on i386) state]
SG_GET_NUM_WAITING   [number of responses waiting to be read()]
SG_GET_PACK_ID       [pack_id of next to read() response
                      (-1 if none)]
SG_GET_REQUEST_TABLE [yields array of requests being processed]
SG_GET_RESERVED_SIZE [current size of reserved buffer]
SG_GET_SCSI_ID       [a little more info than the mid level's
                      SCSI_IOCTL_GET_IDLUN ioctl]
SG_GET_SG_TABLESIZE  [max entries in host's scatter gather table]
SG_GET_TIMEOUT       [yields timeout (unit: jiffies
                      (10ms on i386))]
SG_GET_TRANSFORM     [state of ide-scsi's transform flag]
SG_IO                [send given SCSI command and wait for
                      response]
SG_NEXT_CMD_LEN      [change command length of next command]
SG_SCSI_RESET        [send a SCSI bus, device or host reset]
SG_SET_COMMAND_Q     [set command queuing state {old=0, new=1}]
SG_SET_DEBUG         [set debug level {0}]
SG_SET_KEEP_ORPHAN   [set SG_IO's keep orphan flag {0}]
SG_SET_FORCE_LOW_DMA [force DMA buffer low (<= 16 MB on i386)
                      {0}]
SG_SET_FORCE_PACK_ID [so read() can fetch by pack_id {0}]
SG_SET_RESERVED_SIZE [change default buffer size
                      {SG_DEF_RESERVED_SIZE}]
SG_SET_TIMEOUT       [change current timeout {60 secs} ]
SG_SET_TRANSFORM     [set ide-scsi's ATAPI transform flag {0}]

open()    [recognized oflags: O_RDONLY, O_RDWR, O_EXCL,
           O_NONBLOCK]
close()
read()
write()
ioctl()
poll()    [used when in O_NONBLOCK mode]
fasync()  [enables generation of SIGIO signal for read()]