[ Table Of Contents ][ Answer Guy Current Index ] greetings   bios   1   2   3   4   5   6   7   8   9   10   12   13   14   15   16   17   18   19   20 [ Index of Past Answers ]

(?) The Answer Gang (!)


By Jim Dennis, Ben Okopnik, Dan Wilder, Breen, Chris, and the Gang, the Editors of Linux Gazette... and You!
Send questions (or interesting answers) to

There is no guarantee that your questions here will ever be answered. You can be published anonymously - just let us know!

(?) Adding a new hard drive to a running system.

From Roy Bettle

Answered By Mike Orr

Here I was, all smart and all ... Got RH7.1 running fine, then decided I needed more drive space. So I added a new drive. Now what? I used "fdisk" as root to create a partition on it, but how do I "format"? I tried "mkextfs", "mkext2fs", "make ext2 /dev/hdb", etc., after my experiences using "mkreiserfs" earlier, but all my "ext2" attempts were in vain.

(!) [Mike] Linux's format command is "mkfs", which calls the appropriate filesystem-specific program. So you can run either: 
mkfs -t ext2 /dev/hdb1
or: 
mke2fs /dev/hdb1
Note: /dev/hdb1, not /dev/hdb. For hard disks, you format a partition, not the entire drive.
See the manpages for additional command-line options. I would especially use the -c option to check for bad blocks, since you are using a drive of unknown quality.
(For additional trivia, /sbin/mkfs.ext2 is a hardlink to /sbin/mke2fs.)
(Additional trivia: to format a floppy disk that has never been formatted, run 'superformat'. This creates a dos/vfat filesystem as a side effect. If you wish a different filesystem type, run mkfs after superformatting. The device in this case is /dev/hda since floppies don't have partitions.

(?) Also, to mount it (because I tried "mount -t ext2 /dev/hdb /mnt/tmp", etc.) do I just edit "/etc/fstab" and add the mount point or is there an additional step, possibly during the formatting stage? I tried the above line but was told the mount point didn't exist.

(!) [Mike] The mount point has to be an existing directory. If /mnt/tmp doesn't exist, 'mkdir' it.
You can run 'mount' and 'umount' to mount and unmount the partition whenever you need it, or add a line in /etc/fstab to have it mount automatically at boot time. There is no additional step. See "man mount" and "man 5 fstab".
[big abubble]

(!) You "da bomb"! Thanks! ;-)

RAB

Roy Bettle

This page edited and maintained by the Editors of Linux Gazette Copyright © 2001
Published in issue 67 of Linux Gazette June 2001
HTML script maintained by of Starshine Technical Services, http://www.starshine.org/

[ Table Of Contents ][ Answer Guy Current Index ] greetings   bios   1   2   3   4   5   6   7   8   9   10   12   13   14   15   16   17   18   19   20 [ Index of Past Answers ]